Estonia Latvia Lithuania Poland SlovakiaRomania
Tallinn Riga Vilnius WarsawBratislavaBucharest
sales@fan-and-blower.com
Contacts →

Catalog

Axial Ziehl-abegg fans from 250 to 1200 mm

Fans FE2owlet, ECblue, MAXvent, FB, FC, FE, FL

Ziehl-abegg axial

All axial series of models with a working diameter from 250 to 1200 mm are provided in our catalogue of fans. The wide choice gives the chance to make the order of the equipment, optimum for your production needs, in full to equip and complete any climatic system.

We offer the following series:

FE. Driving wheels developed for these fans of axial execution are made from the cast aluminum whose impeller is equipped with 7 blades of the crescent form. This line provides high performance along with the low level of noise, with regulated speed, is actual in all modern ventilating, heating and refrigerating systems, and also is successfully involved in agriculture.

FC. A series of the axial fans whose price can be reduced in case of wholesale purchase. Aluminum driving wheels with seven blades provide powerful air flows in different directions with very high performance and the optimized efficiency. Owing to this fact a series is applied not only for cooling and cooling, but also for intensive drying. drying.

FB. We provide delivery of built-in fans of the universal use whose driving wheels have four aluminum blades creating some possible attack angles. Thanks to different rotating speed and speed regulation all models show high functional flexibility in refrigerating and ventoborudovaniya.

FL. In this series you can buy the fans optimized for installation in short mouths, with the increased stability of working parameters. Five aluminum blades of especially curved form give three possible attack angles, reducing the noise level. This model is used in the thermal engineering, cooling, refrigerating appliances.

MAXvent 2. Axial fans with average parameters of pressure in this series have an original construction because the blades of the driving wheel are made from fibreglass and finished by engines with high quantity of poles (2-8) and rotating speed which are set in compliance to diameter. Blades provide 5 attack angles that when taken with remaining opportunities allow to change a working configuration – there are more than 150 options. This universal line is used in air conditioners, evaporators, wind-driven installations, ventilating channels, drying aggregates, compressors. It is also applied for cooling of transformers and other electrical equipment.

FE2owlet. A series of the fans, whose price not much higher as traditional in spite of the fact that they are developed with the latest discoveries in bionics. All models have low noise level and power consuming owing to special aerodynamics of seven aluminum blades. They are applied for cooling of electric equipment, in refrigerating equipment and climatic systems. The same differences characterize the FE2owlet-ECblue series with the drive from the firm ECblue engine which has been built in on EC technologies.

All questions of formation of orders and delivery of fans are discussed and solved in short terms. Production received all certificates of conformity and warranties of long-term operation from the vendor.
Axial fans Ziehl-abegg FE2owlet

FE2owlet

fans Ziehl-abegg FE2owlet

FE2owlet ZAplus

Ziehl-abegg ECblue

FE2owlet-ECblue

Ziehl-abegg ZAplus

FE2owlet-ECblue ZAplus

Productivity (max.): 28 000 m3/h
Resistance (max. psF): 230 Pа
With the diameter from 250 to 1000 mm.

Application:
Conditioning, Refrigerating technique, Cooling of transformers, Cooling, Heating systems

 

Productivity (max.): 28 000 m3/h
Resistance (max. psF): 330 Pа
With the diameter from 250 to 1000 mm.

Application:
Conditioning, Refrigerating technique, Cooling of transformers, Cooling, Heating systems

Productivity (max.): 14 500 m3/h
Resistance (max. psF): 265 Pа
With the diameter from 250 to 1000 mm.

Application:
Conditioning, Refrigerating technique, Cooling of transformers, Cooling, Heating systems

Productivity (max.): 28 000 m3/h
Resistance (max. psF): 330 Pа
Temperature is from -35°C to 70°C.
With the diameter from 250 to 1000 mm.

Application:
Conditioning, Refrigerating technique, Cooling of transformers, Cooling, Heating systems


MAXvent axial fans

MAXvent owlet


axial fans Ziehl-abegg FB selection for the catalog

FB


axial fans Ziehl-abegg FC low prices

FC


fans Ziehl-abegg FE buy

FE

Productivity (max.): 130 000 m3/h
Resistance (max. psF): 1900 Pа
With the diameter from 315 to 1400 mm.

Application:
Air conditioners with high differential pressure, bioscrubbers,

wind-driven installations, ventilating channels, compressors,

mechanical engineering, drying of wood and other goods,

as well as cooling of engines and transformers

Productivity (max.): 13 000 m3/h
With the diameter from 350 to 650 mm.

Productivity (max): 2800 м3/ч
With the diameter from 200 to 350 mm.

Application:
Refrigerating equipment, Cooling




Productivity (max.): 62 000 m3/h
With the diameter from 315 to 1250 mm.

Application:
Central airs, Refrigerating equipment, Cooling, Drying, Cooling, Agricultural equipment..




Productivity (max.):26 000 m3/h
With the diameter from 315 to 100 mm.

Application:
Cooling, Central airs of air, Heating system, Refrigerating technique, Agricultural equipment






Deliveries fans Ziehl-abegg FL

FL


Ziehl-abegg FN

FN

Productivity (max.): 11 500 m3/h
With the diameter from 350 to 650 mm.

Application:
Refrigerating equipment, Cooling, thermal engineering
Productivity (max.): 11 500 m3/h
With the diameter from 350 to650 mm.

Application:
Refrigerating equipment, Cooling, thermal engineering


© Buy fans with a choice of power and performance, with catalogs and certificates .All rights reserved.